beautypg.com

Brother MFC7650MC User Manual

Page 136

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Retrieving the Memory Status List and Fax Messages Remotely

__________

From a remote fax machine, you can retrieve your Memory Status List to see if you
have any stored fax messages in the memory. Then you can retrieve all or only
specified fax messages that are on the list.

1. Pick up the handset of a remote touch tone fax machine.

2. Dial your MFC’s number.
3. When your MFC answers with a beep, immediately press your Remote Access

Code (159*).

4. As soon as you hear two (2) short beeps, press 961.

5. When you hear your MFC through the handset responding with a fax tone, press

Start and hold the handset if you also want to retrieve fax messages. (If you wish

to retrieve only the Memory Status List, replace the handset.)

6. You remote fax machine will print the Memory Status List, (See page 151.)
7. Look at the Memory Status List to see if there are any fax messages you want to

retrieve.

8. Press 96 2 as soon as you hear two (2) short beeps.

After 96 2, enter the two-digit message numbers from the Memory Status List (ex.

01

) and end by pressing 00

.

ex.) To receive N0.1 and N0.2 messages, press 96 2 01 02 00.

If you want to retrieve all messages, simply press 00.

ex.) To retrieve all fax messages, press

96 2 00.

9. When you hear your MFC through the handset responding with a fax tone, press

Start.

10.

Replace the handset.

11.

Your remote fax machine will print the fax messages.

Changing the Fax Forwarding Number Remotely

___________________________

1. Pick up the handset of a remote fax machine.

2. Dial your MFC’s number,
3. When your MFC answers with a beep, immediately press your Remote Access

Code (159*).

4. As soon as you hear two (2) short beeps, press 954.
5. Enter your new Fax Forwarding number using the dial pad keys (up to 20 digits).

You cannot register * and # as dial numbers. Use * to create a pause between the

dial numbers.

6. Press # after entering the new number.
7. As soon as you hear the next two (2) short beeps, press 961.
8. When you hear your MFC through the handset responding with a fax tone, press

Start and hold the handset.

9. Your remote fax machine will print the Memory Status List. Look at the list to

make sure the new Fax Forwarding number you registered is correct.

10.

If the new number is correct, wait for the next two (2) short beeps, and press 955.

(If the new number is not correct, press 954 and reenter the number beginning at
Step 5.)

11.

Press 90 to exit remote control.

12.

Replace the handset. Your new Fax Forwarding number is activated.

124