Brother MFC7650MC - Manual (Page 44)

4. USING THE MFC AS A TELEPHONE
Your MFC can be used to make regular telepborie calls. You can dial numbers
manually, by pressing the dial pad keys, or by using One Touch or Speed Dialing.
Manual Dialing
1. Pick up the handset, or press Hook.
2. When you hear a dial tone, you can begin dialing by pressing the dial pad keys.
3. If you used Hook to dial, pick up the handset when the call is answered.
One Touch Dialing
1. Pick up the handset, or press Hook.
2. When you hear a dial tone, press the One Touch key.
3. If you used Hook, pick up the handset when the call is answered.
If you try to use a One Touch number that has not been stored on the key you pressed,
you will hear a warning sound and the display will say, NOT REGISTERED. The
display will return to normal after 2 seconds.
Speed Dialing ___________________________________________________ _
1. Pick up the handset or press Hook.
2. When you hear a dial tone, press Speed Dial and then press the two-digit Speed
Dial number.
3. If you used Hook, pick up the handset when the call is answered.
Using Hold, Pause, # with the Telephone
- Press Redial/Pause to insert a 3.5 second pause between numbers.
- Press Hold to put a call on hold. You can replace the handset without
disconnecting the call. You must pick up the MFC’s handset to release the
call from Hold.
- Press # to switch the dialing type from "pulse” to “tone” temporarily. This
key also is used for push-button services, such as those offered by banks,
credit card companies, or paging services.
32