Brother MFC7650MC - Manual (Page 131)

V b i m » \ » V I W L ^ L . I I I I >|\.^V/
10. Enter a PIN (Personal Identification
Number), #, press Redial/Patise key your
MFC telephone number, and ##.
Example: 12345#-19085551234##.
-If you do not use a PIN, you must enter the
telephone number of your MFC. Press
RediaFPause key before entering your
fax number and add ## at the end.
Example: -19085551234##
11. Press Set.
12. Press Stop to exit.
5#-19085551234##
3.FAX FWD/PAGING
Paging number and PIN cannot be changed remotely.
Redial/Pause appears as a hyphen on the display.
FOR YOUR INFORMATION
The PIN (Personal Identification Number) you enter depends upon the
type of paging company you use. There are generally two types of paging
companies...
1) Satellite Pagers: In this case we recommend you enter your actual
satellite PIN# plus your return MFC telephone/fax number/or special
alpha message.
PIN# Return# PIN# Alpha Message
For Example; 12345#19085551234## or 12345#329329329##
FAXFAXFAX
2) Radio Pagers: Most* radio pagers do not require a PIN #, and in this case
you should use the PIN # in the MFC only for the return number or
special alpha message.
Return# Alpha Message
For Example: 19085551234## or 329329329##
FAXFAXFAX
* If your radio pager utilizes a PIN # then use the satellite sequence
above.
The “##” symbols at the end of the special message (or return #) are used
to signify the end the PIN #/Message.
119