Brother MFC7650MC - Manual (Page 82)

6. P r e s s ( l e f t arrow) or ►-(right arrow) to
select the reduction ratio you want:
- If you want Auto Reduction, choose
“AUTO”.
Choose 93%, 87%, or 75% if you want
Fixed Reduction.
Example: 93%
- Choose 100% if you want to record the
same size,
7. Press Set.
8. Press Stop to exit.
REDUCTION: 93%
b . K E U U C I i U N
NOTICE
You can use Auto Reduction to reduce incoming documents to fit on one
page of paper, only as long as the original document is not longer than
legal size. If the original is longer than legal size, the data will not be
reduced (see For Your Information below) and will carry over to print on
a second page.
When you use Auto Reduction and you receive an incoming document that
is smaller than your paper, no reduction will take place.
When selecting Fixed Reduction, you must consider the size of the paper
as registered in Function, 1,5, 6. (See page 68.) If you selected letter
size, you can choose a reduction of 93%, 87%, or 75%. If you selected A4
size, you can choose a reduction of only 93% or 87%. And if you selected
legal size, you can choose only 93%.
FOR YOUR INFORMATION
Selecting the Ratios of Fixed Reduction
Other party sends you a document
the size of... Your receiving
paper size is;
Recommended
Reduction Ratio is:
Letter document (8.5"x11")
(mostly Domestic communications) Letter 93%
A4, Legal 100%
A4 document (8.2"x11.6")
(mostly International communications)
Letter 87%
A4 93%
Legal 100%
Legal documents (8.5"x14")
Letter 75%
Legal 93%
70