Brother MFC7650MC User Manual
Page 209
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\
I W
1 1 1 1 N - /
Printed pages are
blurred at the center or
at either edge.
Blurred Page
Ghost
images
appear
on printed pages.
Ghost Images
Suggestions
Certain
environmental
conditions
such
as
humidity,
high
temperatures, etc. may cause this condition to occur.
• Make sure the MFC is placed on a flat, horizontal surface.
•
Remove the drum unit with the toner cartridge installed. Try
rocking them from side to side.
• You may
clear
a blurred
page
by
wiping the
scanner
windowo
with
a
clean
soft cloth. (See “Regular Maintenance” and
“Cleaning the Drum Unit” on pages 165-167.)
If a blurred page occurs after cleaning and the display shows
CHANGE DRUM SOON, replace the drum unit with a new
Turn the print density dial counterclockwise for lighter images.
See “The Print is too Light or too Dark” on page 186.
Make sure that you use paper that meets the spacifications.
Rough surface or thick media can cause a ghost image.
NOTE:
The drum unit is a consumable item, and it is necessary to replace it periodically.
197