FaxBack NET SatisFAXtion 9.0 - Fax Server Manual - Manual (Page 184)

JPEG
JBIG
COLOR
200H_400V
300H_300V
400H_400V
allowed_receive_transfer_types [string]: These settings control the type of fax and file
transfers that the driver can perform for a device. Format: Comma separated list of the
following. Default: FAX,ECM,V34.
FAX
ECM
V34
allowed_send_image_types [string]: These settings control the image types that the device
can send and receive via the T.30 protocol over the telephone network. To receive or send some
image types, the corresponding allowed_receive/send_transfer_type setting must include ECM.
Format: Comma separated list of the following. Default: 1D,2D,T6,JBIG.
1D
2D
T6
JPEG
JBIG
COLOR
200H_400V
300H_300V
400H_400V
allowed_send_transfer_types [string]: These settings control the type of fax and file
transfers that the driver can perform for a device. Format: Comma separated list of the
following. Default: FAX,ECM,V34.
FAX
ECM
V34
audio_mode [string]: Enables certain behaviors during the G.711 μ­law portion of a fax call.
Format: Comma separated list of the following values. Default: PLAY_CNG, RECORD,
PLAY_CED.
RECORD – Specifies G.711 audio data received should be recorded to disk as .wav file.
PLAY_CNG – Specifies that a CNG tone will be played at the start of a send fax.
PLAY_CED – Specifies that a CED answer tone will be played at the start of a receive
fax.
audio_qos_token_rate [dword 0–65535]: TokenRate of sending RTP RSVP FlowSpec.
Default: 9250.
audio_qos_peak_bandwidth [dword 0–65535]: PeakBandwidth of sending RTP RSVP
FlowSpec. Default: 13875.
audio_qos_token_bucket_size [dword 0–65535]: TokenBucketSize of sending RTP RSVP
FlowSpec. Default: 680.
Proprietary FaxBack, Inc. 2014 184