FaxBack NET SatisFAXtion 9.0 - Fax Server Manual - Manual (Page 176)

send some image types, the corresponding allowed_receive/send_transfer_type setting must
include ECM. Format: Comma separated list of the following. Default: 1D,2D,T6,JBIG.
1D
2D
T6
JPEG
JBIG
COLOR
200H_400V
300H_300V
400H_400V
allowed_receive_transfer_types [string]: These settings control the type of fax and file
transfers that the driver can perform for a device. Format: Comma separated list of the
following. Default: FAX,ECM,V34.
FAX
ECM
V34
allowed_send_image_types [string]: These settings control the image types that the device
can send and receive via the T.30 protocol over the telephone network. To receive or send some
image types, the corresponding allowed_receive/send_transfer_type setting must include ECM.
Format: Comma separated list of the following. Default: 1D,2D,T6,JBIG.
1D
2D
T6
JPEG
JBIG
COLOR
200H_400V
300H_300V
400H_400V
allowed_send_transfer_types [string]: These settings control the type of fax and file
transfers that the driver can perform for a device. Format: Comma separated list of the
following. Default: FAX,ECM,V34.
FAX
ECM
V34
dial_prefix [string(20)]: Data to be prepended to dial strings, typically 9, if present.
Class1 Device
allowed_receive_baud_rates [string]: This setting restricts a modem to use only
certain baud rates. Use this to block a modem from using a rate or rates that it
supports, but are unreliable in your environment or are undesirable for some other
reason. On transmitting, use this as a mask; the modem will use only those rates you
list. On receiving, set the fastest and slowest rates; the modem will allow those and any
in between. Format: Comma separated list of 14400, 12000, 9600, 7200, 4800 and
2400. Default: 14400,12000,9600,7200,4800,2400.
allowed_send_baud_rates [string]: This setting restricts a modem to use only
certain baud rates. Use this to block a modem from using a rate or rates that it
supports, but are unreliable in your environment or are undesirable for some other
reason. On transmitting, use this as a mask; the modem will use only those rates you
list. On receiving, set the fastest and slowest rates; the modem will allow those and any
in between. Format: Comma separated list of 14400, 12000, 9600, 7200, 4800 and
2400. Default: 14400,12000,9600,7200,4800,2400.
carrier_wait [dword 0–255]: Seconds the driver to wait in the “dialing” or “answering”
Proprietary FaxBack, Inc. 2014 176