FaxBack NET SatisFAXtion 9.0 - Fax Server Manual - Manual (Page 168)

filebase_memory_only [boolean]: When the FILEBASE queue driver is enabled, causes the
queue to be stored in memory for maximum performance. Provides zero recovery if the system
were to be shutdown in a unfriendly manner since the queue will be lost.
filebase_on [boolean]: Turns on/off the storage of queue files in an optimized database.
Provides no benefit for systems running with under 300 ports. Note that the bypass_filebase
setting overrides this one. Set bypass_filebase to false for this setting to have any effect.
Default: false.
force_standard_resolution_sends [boolean]: When this setting is true, then no matter
whether a send fax is submitted to go out as FINE, it will always be force to go out as coarse
(aka standard) resolution. Default: false.
global_comm_state [string]: Enables ICANFax to send/receive when it is loaded. The default
is to not do either since higher level modules need to parse the ICANFax queues without
ICANFax interfering. Format: Comma­separated list of SEND and RECEIVE. Default: SEND,
RECEIVE.
global_debug_show_output [string]
global_debug_show_file_path [string]: Partial path or complete path and file name of where
to create debug file. If the debug_show_output is set for CONSOLE and the
debug_show_file_path is specified in the registry, then you can get both CONSOLE and FILE
debug output simultaneously. This is a device specific setting, but you can set the default for all
devices by specifying this under the global ICANFax section.
header_date [string]: Specifies format and delimiters of date string in the fax page header.
Format: Any order of M/D/Y; any delimiter to replace "/"; 4­digit (YYYY) year. Uppercase means
to use leading zeros; lower­case means to use spaces in place of leading zeros. (For example, for
February 4, 2006, MM/DD/YY will produce 02/04/06; mm/dd/yy will produce 2/ 4/06.) Default:
mm/DD/YY.
header_from [string]: Text to display before the name of the sender in the fax page header.
header_page [string]: Specifies format of the “page x of y” string in the fax page header.
Default: p. ? of ?.
header_time [string]: Specifies 12 or 24­hour time format of time string in the fax page.
Format: 12 or 24. Default: 12.
header_to [string]: Text to display before the name of the recipient in the fax page header.
Default: To:.
ignore_mail_pages
ipc_channel_count
ipc_base_name
keep_debug_image_always [boolean]: This is used when the debug_recieved_image_types
is enabled. Setting this true does not delete the debug file if it converts ok. Default: false.
last_message_handle [dword 0–65535]: This entry is written by Icf_main whenever it
creates a new message handle. It is read during load to determine what the starting next
message handle should be. If it is not present during load, ICANFax will fallback to its default
method of determining the next message handle by scanning the queues for the highest
message handle present. This was created because some buggy modules would delete an
ICANFax message, but keep the handle number to themselves for their own future reference.
If ICANFax had been reloaded, it would reuse these deleted handle numbers which would cause
the buggy modules to behave in a buggy way. This new method should insure a full cycle (64K)
of message handle numbers across multiple loads of ICANFax before a message handle number
gets reused by ICANFax. Default: 0.
max_consecutive_failed_sends [dword 0–255]: When a device has failed to send
successfully this many times in a row, that device will not be allowed to send again. Set this to
255 to disable this feature. Default: 255.
Proprietary FaxBack, Inc. 2014 168