Using the strobe function, Pouziti funkce strobe – Panasonic NV-RX70EE User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r '
□.MODE
0 e
'®C
rn^
□.EFFECT
ENGLISH
Using the Strobe Function
This function continuously records 4 still pictures per
second to give the picture a stroboscope-like effect,
while the sound is recorded as usual.
1
Press the [D.EFFECT] Button
repeatedly until the [STROBE]
Indication appears in the Finder.
•The Digital Effect Indication Lamp [@] lights.
2
Press the Start/Stop Button to start
recording.
•All subsequent scenes will be recorded with
strobe effect until you cancel the Strobe Function.
■ Cancelling the Strobe Function
Press the [D.EFFECT] Button repeatedly until none of
the 8 Digital Effect Indications are displayed in the Finder.
•Since the strobe pictures are recorded from the
digital image memory, the picture quality is slightly
inferior to that of normally recorded pictures.
•When recording under fluorescent lamps, the
brightness of the picture may fluctuate.
Pouziti funkce Strobe
Tato funkce kontinualne nahrava 4 zastavene obrazy za
sekundu, aby vytvofila stroboskopicky efekt, zatimco
zvukje nahravan normalne.
1
Stisknete opakovane tiacitko
[D.EFFECT], az se v hledacku objevi
indikace [STROBE].
• Rozsviti se indikator digitalniho efektu [® ].
2
Stisknete tiacitko Start/Stop, abyste
zacali nataceni.
•Vsechny nasledujicf pfechody ze sceny do sceny
budou natoceny s efektem Strobe do te doby, nez
tuto funkci zrusite.
■ Zruseni funkce Strobe
Stisknete opakovane tiacitko [D.EFFECT] tak, aby v
hledacku nesvitila ani jedna z 8 indikaci digitalniho
efektu.
'Protoze jsou obrazy funkce Strobe nahravany z
digitaini obrazove pameti, kvalita obrazu se lehce
snizuje.
'Pod fluorescencnimi lampami muze dojit ke
kolisani svetlosti obrazu.
82