Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 92)

X To end recording: select Stop Stop
Recording Recording in the "Routes" menu by turning
cVd the COMAND controller and press
W to confirm.
Displaying and editing the recorded
route
X Insert the SD memory card (
Y
page 195).
X Calling up the "Routes" menu (
Y
page 89).
X Select List List in the "Routes" menu by
turning cVd the COMAND controller and
press W to confirm.
Previously recorded routes are displayed.
X Select a route and press W to confirm.
The map appears with a menu. The
recorded route is shown in the map with a
blue dotted line.
X Demonstration of the route on the
map: select Demo Demo by turning cVd the
COMAND controller and press W to
confirm.
The map with the crosshair appears.
X Proceed as described in the "Route
demonstration" section (
Y
page 88).
X To begin route calculation: select Start Start
in the menu by turning cVd the COMAND
controller and press W to confirm.
COMAND attempts to align the recorded
route with the digital map.
Changing route names and icons
X Select Edit Edit in the menu by turning cVd
the COMAND controller and press W to
confirm.
X To change the route name: select
Rename Rename and press W to confirm.
i The name cannot be changed while the
vehicle is in motion.
X To change the icon: select Change Icon Change Icon
and press W to confirm.
Observe the further information on managing
categories for personal POIs (
Y
page 77).
To change direction for route
calculation: you can set the icon for the
route to the starting point or to the
destination, thereby changing the direction
for route calculation.
During route calculation, one-way streets or
turn restrictions, for example, are taken into
account. Therefore, the outward and return
routes may differ from each other.
90
Route guidance
Navi
gati
on