Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 127)

Option 2: use Secure Simple Pairing
The mobile phone (or the Bluetooth
® audio
device) must support the Bluetooth ® version
2.1 for connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be
connected.
X If the code is the same on both devices,
confirm Yes Yes by pressing W.
If you select Yes Yes , the authorization process
is completed and the mobile phone is
connected.
If you select
No No , the process will be
canceled.
X Confirm the message on the mobile phone.
External authorization
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND. The Bluetooth ® device name of
COMAND is " MB Bluetooth MB Bluetooth ".
Please note the following: some mobile
phones require that you establish the
connection to COMAND again once you have
entered the passkey (see the mobile phone
operating instructions). The mobile phone
cannot otherwise be authorized.
X Press the % function button on
COMAND.
X Select Connect Dev. Connect Dev. in the telephone
basic menu by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
The Bluetooth
® telephone list appears.
X Select Connect via Phone Connect via Phone and press W
to confirm.
The message on the left appears.
X Start the Bluetooth ® search on the mobile
phone; see the mobile phone operating
instructions.
X Select COMAND ( MB Bluetooth MB Bluetooth ) on the
mobile phone.
X
Option 1: when requested to do so, enter
the passkey first on the mobile phone and
then in COMAND.
X
Option 2: confirm the displayed codes on
the mobile phone and in COMAND (Secure
Simple Pairing).
With both options, you see the prompt Do Do
you want to be you want to be
authorized? authorized? on the COMAND display.
X If you select Yes Yes , the mobile phone will be
authorized. The messages Waiting for Waiting for
a Connection to a Connection to
dev.>... dev.>... and Connecting Bluetooth Connecting Bluetooth
Profiles... Profiles... are displayed. If the
connection is successful, you see the
telephone basic menu and the connected
mobile phone is entered.
If you select
No No , the process will be aborted.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
Telephony via the Bluetooth ® interface 125
Telephone
Z