Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 34)

For optimum playback quality:
X Deactivate the “EQ” setting on the
iPod ® .
Surround-sound playback does not
function for mono signal sources, such as
the medium wave range (MW) in radio
mode.
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
Character entry (telephony)
Example: entering characters
:* To switch the character bar to
uppercase/lowercase letters
;p To switch the character bar from
uppercase/lowercase letters to
digits
=B To change the language of the
character bar
?2 To delete a character/an entry
The example describes how to enter the
surname “Schulz”.
X Call up the input menu with data fields
(
Y
page 135).
X Select SS and confirm by pressing W the
COMAND controller.
SS appears in the data field.
X Select cc and confirm by pressing W the
COMAND controller.
The letter cc is added to SS in the data field.
X Repeat the process until the name has
been entered in full.
Other input menu functions:
R to delete a character/entry (
Y
page 33)
R to switch between upper/lower-case
letters (
Y
page 33)
R to change the character set (
Y
page 33)
R to move the cursor in the data field
(
Y
page 33)
X
To enter a phone number: select the
digits one by one in the corresponding data
field by turning cVd and sliding ZVÆ the
COMAND controller and press W to
confirm.
Switching data fields
: Cursor in the next data field
; Storing an entry
= 4 and 5 symbols to select a data field
In the input menu, if you want to enter a first
name after you have entered a surname, for
example, proceed as follows to switch
between the data fields:
Option 1
X Select 4 or 5 in the character bar and
press W to confirm.
The input menu shows the data field
selected.
32
Character entry (telephony)
At
a
glanc
e