Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 187)

X Directly in the station presets: press W
the COMAND controller when the display/
selection window is active.
or
X Select Presets Presets by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
X Select a preset by turning cVd the
COMAND controller and press and hold
W until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found,
beginning with preset 1. When the highest
frequency is reached or 10 stations have
been found, the storing process ends. Any
stations stored manually under the presets
will be lost. COMAND may not occupy all
memory slots when storing.
X Option 1: press W the COMAND controller
when the display/selection window is
active.
The station preset memory appears.
X Option 2: select Presets Presets by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
The station preset memory appears.
X Irrespective of the option, select
Autostore Autostore and press W to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available
stations are automatically stored in the
preset positions.
X To cancel storing: select Cancel Cancel and
press W to confirm.
Weather Band
Activating
X Press the $ function button repeatedly
until the Weather Band is switched on.
or
X Select the currently set waveband FM FM or
AM AM by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X Select WB WB from the menu and press W to
confirm.
Searching for a channel
X Quick select: turn cVd or slide XVY the
COMAND controller while the display/
selection window is active.
or
X Press the E or F button.
Channel search scans up or down and
stops at the next channel found.
Selecting a channel from the channel
list
X Select Channel Channel by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
The channel list appears.
Radio mode
185
Aud
io