Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 52)

i For SL-Class vehicles with dynamic
multicontour seats: when driving dynamics
are activated due to a change of direction
(e.g. cornering), the backrest side cushion
settings can temporarily not be used.
Adjusting the seat side bolsters
This function is only available on SL-Class
vehicles with multicontour seats or dynamic
multicontour seats.
This function allows you to adjust the air
cushions in the seat side bolsters.
X Select the seat (
Y
page 48).
X Select Seat Sides Seat Sides by turning cVd the
COMAND controller and press W to
confirm.
A scale appears.
X Turn cVd or slide ZVÆ the COMAND
controller and press W to confirm.
X To exit the menu: press the % back
button.
Balance
This function is available on SL-Class
vehicles.
The Balance function controls the distribution
of heat on the seat backrest and cushion.
The Balance function influences the currently
set heating level of the seat heating; see the
separate vehicle Operator's Manual.
X Select the seat (
Y
page 48).
X Select Balance Balance by turning cVd the
COMAND controller and press W to
confirm.
A scale appears and shows the current
setting. Positive values indicate the heat
output for the seat backrest, negative
values indicate the heat output for the seat
cushion. The intensity is indicated by an
orange bar in the stylized seat above the
scale.
The values stand for:
R 00 - backrest and seat cushion are heated
equally to the maximum level
R 11 to 33 - the heat output to the seat
cushion is reduced in one-third
increments
R -1 -1 to -3 -3 - the heat output to the backrest
is reduced in one-third increments
X Turn cVd or slide XVY the COMAND
controller and press W to confirm.
X To exit the menu: press the % back
button.
Massage function
This function is available on M-Class and GL-
Class vehicles with multicontour seats and on
SL-Class vehicles with dynamic multicontour
seats.
50
Seat functions
Vehi
cle
func
tio
ns