Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 113)

X Select Avoid New Area Avoid New Area and press W to
confirm.
If you have already selected one or more
areas to avoid, a list of areas appears.
Example: list of areas
i Available positions in the list are named
Empty Empty and are shown in gray.
X Select Avoid New Area Avoid New Area by turning cVd
the COMAND controller and press W to
confirm.
A menu appears.
X Select Using Map Using Map , From Memory From Memory or From From
Personal POIs Personal POIs and press W to confirm.
If you select Using Map Using Map , the map with the
crosshair appears.
If you select
From Memory From Memory or From From
Personal POIs Personal POIs , either the destination
memory or the list of categories for POIs
appears.
R Destination memory (
Y
page 63)
R List of categories for personal POIs
(
Y
page 79)
X
Select the desired destination or personal
POI and press W to confirm.
X
When the destination address is displayed,
select Continue Continue and press W to confirm.
The map appears.
X To avoid a new area: call up the area menu
again (
Y
page 110).
Switching an avoided area on/off
X Call up the area list (
Y
page 110).
X Select an entry in the list by turning cVd
the COMAND controller and press W to
confirm.
The avoided area is switched on O or off
ª depending on the previous status.
Displaying and changing an avoided
area
X Call up the area list (
Y
page 110).
X Select an entry in the list by turning cVd
the COMAND controller.
X Slide VY the COMAND controller and
press W to confirm.
X Select Display / Display / Change Change and press W to
confirm.
The area to be avoided is indicated in the
map.
X To change the location of the area: slide
XVY, ZVÆ or aVb the COMAND
controller.
The area is moved on the map.
X
To adjust the size of the area: turn
cVd the COMAND controller.
The area is enlarged or reduced.
X To confirm the change: press W the
COMAND controller.
The list appears and the change is entered.
Additional settings
111
Navig
atio
n
Z