Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 71)

X To make a call: select Call Call with the
COMAND controller and press W to
confirm. COMAND switches to telephone
mode (
Y
page 128).
i This menu item is available if the waypoint
has a telephone number and if a mobile
phone is connected to
COMAND(
Y
page 122).
X To call up the map: select Map Map with the
COMAND controller and press W to
confirm.
X You can move the map and select the
destination.
X To store the waypoint in the destination
memory: select Presets Presets with the
COMAND controller and press W to
confirm.
Once you have accepted the waypoint, it is
entered in the waypoint menu.
Waypoint menu with two waypoints
Editing waypoints
You can:
R change waypoints
R change the sequence in the waypoint menu
R delete waypoints
To change the sequence, both waypoints
must be entered.
X To change waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
X Select Edit Edit and press W to confirm.
X Use one of the destination entry options
offered.
X
To change the sequence of the
waypoints: select Swap Swap in the waypoint
menu by turning cVd the COMAND
controller and press W to confirm.
The entries are swapped.
X To delete waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
X Select Delete Delete and press W to confirm.
i You can use this menu item to delete a
waypoint directly after entry.
Accepting waypoints for the route
X Select Start Start in the waypoint menu by
turning cVd the COMAND controller and
press W to confirm.
The route is calculated with the entered
waypoints.
i The Continue Continue menu item is displayed
instead of Start Start if Calculate Calculate
Alternative Routes Alternative Routes is activated in the
navigation menu (option 2) (
Y
page 86).
In the example, there are both waypoints 1
and 2.
Destination input
69
Navi
gati
on
Z