Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 111)

Traffic information on the map
: Speed & Flow
; Free Flow
= Traffic incidents
If you subscribe to the SIRIUS XM Satellite
Radio Traffic Message Service, traffic
information can be displayed on the map. You
can select three categories for the display.
X
To switch the display on/off: press W
the COMAND controller to show the menu.
X Select Navi Navi in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X Select Traffic Traffic Information Information On On Map Map and
press W to confirm.
X Select Incidents Incidents and/or Speed & Flow Speed & Flow
and/or Free Flow Free Flow and press W to
confirm.
Depending on the previous status, switch
the option on O or off ª.
Traffic
information
Display on the map
Traffic
incidents
Road sections with traffic
incidents are illustrated
with a yellow line and
arrows.
Speed &
Flow
Road sections with traffic
jams are displayed with
yellow or red car icons.
Yellow car symbols: traffic
jams, average speed
25 - 45 mph (40 - 72 km/h).
Red car icons: traffic jam,
average speed 5 - 20 mph
(8 - 32 km/h)
Free Flow Free flowing road sections
are illustrated with a green
line and arrows.
Additional settings
Avoiding an area
General information
COMAND enables you to avoid areas you do
not wish to drive through.
If you activate or deactivate a route block
while route guidance is active, COMAND will
calculate a new route. If you activate or
deactivate a route block while route guidance
is inactive, COMAND will use the new setting
for the next route guidance.
The calculated route may include an area to
be avoided if:
R your destination is located in such an area.
R the route uses roads that lead through an
area to be avoided.
i Highways within blocked areas are always
taken into consideration in the route
calculation.
Additional settings
109
Navi
gati
on
Z