Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 126)

list. In this case, start a new search to
update the Bluetooth ® telephone list.
Authorizing (registering) a mobile
phone
Passkey entry
Telephone basic menu
Option 1: using the passkey (access code)
X
Select the mobile phone using the Ï
symbol in the Bluetooth
® telephone list by
turning cVd the COMAND controller and
press W to confirm.
The input menu for the passkey appears.
The passkey is any one to sixteen-digit
number combination which you can choose
yourself. You must enter the same number
combination in COMAND and in the
Bluetooth ® -capable mobile phone (see the
mobile phone operating instructions).
i Some mobile phones require a passkey
with four or more digits.
i If you want to reauthorize a mobile phone
following de-authorization, you can select
a different passkey.
i Mercedes-Benz recommends de-
authorization in COMAND and on the
mobile phone (
Y
page 126). Subsequent
authorization may otherwise fail.
X To enter the passkey in COMAND: press
the number keys one after the other.
or
X Select the digits in the digit bar one by one
by turning cVd the COMAND controller
and press W to confirm.
¬ is highlighted after the first number
has been entered.
X In both cases, select ¬ and press W to
confirm.
X To enter the passkey on the mobile
phone: if the Bluetooth ® connection is
successful, you will be requested to enter
the passkey (access code, passcode; see
the mobile phone operating instructions).
X
Enter the same passkey in the mobile
phone as the one already entered in
COMAND.
The message Connecting Bluetooth Connecting Bluetooth
Profiles... Profiles... appears.
The Authorization successful Authorization successful
message appears once authorization is
completed.
The mobile phone is connected to COMAND
(authorized). You can now make phone calls
using the COMAND hands-free system.
i After entering the passkey, you may also
need to enter a confirmation in your mobile
phone to connect calls. Please check your
mobile phone display. On some mobile
phones, this confirmation can be saved. In
this case, you do not need to enter it again.
If the COMAND display shows the
Authorization failed Authorization failed message, you
may have exceeded the prescribed time
period. Repeat the procedure.
124 Telephony via the Bluetooth ® interface
Telep
hone