Telephone, Telephony via the bluetooth, Interface – Mercedes-Benz SLS-Class 2013 COMAND Manual User Manual
Page 123
Press W
R
using the 6 or ~ button and using
the telephone keypad on COMAND
R
using the 6 or ~ button on the
multifunction steering wheel
R
using the Voice Control System (see the
separate Voice Control System operating
instructions)
Unless stated otherwise, the descriptions and
illustrations in this section refer to COMAND.
Function restrictions
The telephone is not ready for use in the
following situations:
R
the telephone automatically tries to log on
to a network. If no network is available, you
may not be able to make a "911"
emergency call. If you attempt to make an
outgoing call, the
No
No Service
Service
message will
appear for a short while.
911 emergency call
G
WARNING
The 911 emergency call system is a public
service. Using it without due cause is a
criminal offense.
The following requirements must be fulfilled
for a 911 emergency call:
R
the mobile phone must be switched on.
R
a network must be available.
R
a valid and operational SIM card must be
inserted in the mobile phone.
R
the mobile phone is connected to COMAND
via Bluetooth
®
.
If you cannot make an emergency call, you
must arrange rescue measures yourself.
X
Enter the number on COMAND
(
Y
page 128).
X
Press 6.
The telephone makes the connection.
X
Wait until the emergency call center
answers and describe the emergency
situation.
Telephony via the Bluetooth
®
interface
Conditions
For telephony via COMAND's Bluetooth
®
interface, a Bluetooth
®
-capable mobile
phone is required.
On COMAND
X
Activate the Bluetooth
®
function in
COMAND (
Y
page 40).
On the mobile phone
X
Switch on the mobile phone and enter the
PIN when prompted to do so (see the
mobile phone operating instructions).
X
Activate Bluetooth
®
functions and, where
necessary, Bluetooth
®
visibility on the
mobile phone (see the mobile phone
operating instructions).
The battery of the mobile phone should
always be kept sufficiently charged in order
to prevent malfunctions.
In preparation for telephoning via the
Bluetooth
®
interface, you should check the
following items on your mobile phone (see the
mobile phone operating instructions):
R
Hands-Free Profile
The mobile phone must support Hands-
Free Profile 1.0 or above.
R
Bluetooth
®
visibility
On certain mobile phones, the device itself
must be made "visible" to other devices, as
well as activating the Bluetooth
®
function
(see the mobile phone operating
instructions).
Telephony via the Bluetooth
®
interface
121
Telephone
Z
- SLK-Class 2013 COMAND Manual SL-Class 2013 COMAND Manual M-Class 2013 COMAND Manual GLK-Class 2013 COMAND Manual GL-Class 2013 COMAND Manual G-Class 2013 COMAND Manual E-Wagon 2013 COMAND Manual E-Sedan 2013 COMAND Manual E-Cab 2013 COMAND Manual E-Coupe 2013 COMAND Manual CLS-Class 2013 COMAND Manual C-Sedan 2013 COMAND Manual C-Coupe 2013 COMAND Manual