Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 88)

X To cancel route guidance: select Cancel Cancel
Route Guidance Route Guidance and press W to confirm.
or
X To continue route guidance: select
Continue Route Guidance Continue Route Guidance and press W
to confirm.
COMAND calculates the route.
Destination or area of destination
reached
When you reach your destination, COMAND
displays a checkered flag and route guidance
is automatically ended.
If the destination is not in close proximity to
a digitized street, the Area of Area of
destination reached destination reached message appears
when the destination is reached.
Influencing route guidance
Avoiding a section of the route blocked
by a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X Select Route Route in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X Select Detour Detour and press W to confirm.
X To block a section of the route: select
Longer Longer or Shorter Shorter repeatedly and confirm
using W until the desired section has been
selected.
i The total length of the section that can be
blocked is defined by the digital map. The
menu items are available accordingly.
X To start route calculation: select Start Start
and press W to confirm.
X To delete the blocked section: select
Delete Delete while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.
Selecting an alternative route
With the "Alternative route" function, routes
other than the original one can be calculated.
Routes 1 to 3 are calculated with the current
settings for the route type and route options
and are shown with a dark blue line
(
Y
page 56).
Route 4 is the economic route (eco route) and
is shown with a green line.
On the right-hand side, you will see
information on the currently selected
alternative route, e.g. distance, estimated
remaining driving time and estimated time of
arrival. Route sections used (e.g. freeways,
tunnels) are displayed as symbols.
Option 1
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X Select Route Route in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X Select Alternative Route Alternative Route and press W
to confirm.
86
Route guidance
Navi
gati
on