Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 167)

X To change the map scale: as soon as you
turn cVd the COMAND controller, the
scale bar appears.
X
Turn cVd until the desired scale is set.
i The data is downloaded again from the
server for these functions. This can delay
the display of the weather map.
Showing/hiding the menu in the
weather map
X
To show: press W the COMAND controller
in the weather map.
X To hide: slide up ZV the COMAND
controller.
Switching to the weather information
display in the map
X Display the menu on the weather map
(
Y
page 165).
X Select View View by turning cVd the COMAND
controller and press W to confirm.
Weather
characteristic
Display on the map
Hazard Icons Hazard Icons Displays warnings
Radar Map Radar Map Displays the rain radar as
a colored area on the
map
Atmospheric Atmospheric
Pressure Pressure
Displays air pressure
with isobars and as a
colored area on the map
Temperatures Temperatures Displays the
temperatures
Cloud Cover Cloud Cover Displays the clouds
Winds Winds Displays wind direction
with an arrow and wind
speed with coloring
i The hazard icon display is preset in the
factory. This presetting can be changed in
the Options menu (
Y
page 167).
X Select a weather characteristic by turning
cVd the COMAND controller and press
W to confirm.
The # dot indicates which weather
characteristic is currently displayed on the
map. You can select one weather
characteristic at a time.
Legend
X Display the menu on the weather map
(
Y
page 165).
X Select View View by turning cVd the COMAND
controller and press W to confirm.
X Select Legend Legend and press W to confirm.
The legend is displayed in accordance with
the currently selected weather
characteristic.
X To switch back to the information
chart: display the menu on the weather
map (
Y
page 165).
X Select Display Weather Display Weather and press W to
confirm.
Memory functions
Storing a location in the memory
You can save locations that are called up
frequently in ten preset positions (0, 1 – 9).
X Select the location (
Y
page 163).
X Press and hold a number key.
When the location is saved, the number of
the selected preset comes before the name
of the place in the caption.
Selecting a location from the memory
X Quick select: when the weather display
(COMAND) is switched on and an entry is
available, press a number key, e.g. l.
The information chart appears and displays
the weather information.
X From the weather memory: select
Position Position in the information chart by
Weather
165
On
line
and
In
tern
et
func
tio
ns