Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 29)

Selecting a menu item
X Select the station by turning cVd the
COMAND controller and press W to
confirm.
The station is set.
Basic COMAND functions
Switching COMAND on/off
X Press the q control knob.
A warning message appears. COMAND
calls up the previously selected menu.
i If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
Switching the sound on or off
Audio/video source sound
X Press the 8 button on the COMAND
controller or on the multifunction steering
wheel.
The sound from the respective audio or
video source is switched on or off.
i When the sound is off, the system
displays the , icon in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i Even if the sound is switched off, you will
still hear navigation system
announcements.
Switching off navigation
announcements
X
Navigation announcements: press the
8 button during the announcement.
Switching navigation announcements
back on
X
Press the 8 button again.
The navigation announcements are active
again:
R if COMAND is switched off/on with the
q control knob.
R or after starting route guidance
Adjusting the volume
Adjusting the volume for the audio or
video source
X
Turn the q control knob
or
X Press the W or X button on the
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the
following:
R navigation announcements
R phone calls
R voice output of the Voice Control System
(see the separate operating instructions)
Adjusting the volume for navigation
announcements
During a navigation announcement:
X Turn the q control knob
or
X
Press the W or X button on the
multifunction steering wheel.
Basic COMAND functions
27
At
a
glance