Mercedes-Benz SLS-Class 2013 COMAND Manual - Manual (Page 44)

X Insert the SD memory card (
Y
page 195).
or
X Connect a USB device (e.g. a USB memory
stick) (
Y
page 195).
X Press W.
The system menu appears.
X Select Settings Settings by turning cVd the
COMAND controller and press W to
confirm.
X Select Import/Export Data Import/Export Data and press
W to confirm.
X Select Import Data Import Data or Export Data Export Data and
press W to confirm.
X To select a preset: select Memory Memory Card Card or
USB Storage USB Storage and press W to confirm.
X Select All Data All Data and press W to confirm.
This function exports all the data to the
selected disc.
or
X
Select the data type and press W to
confirm.
Depending on the previous entry, select the
data type for the export O or not ª.
X Select Continue Continue and press W to confirm.
i Personal music files in the MUSIC
REGISTER cannot be saved and imported
again using this function.
Reset function
You can completely reset COMAND to the
factory settings. Amongst other things, this
will delete all personal COMAND data. This
includes the station presets, entries in the
destination memory and in the list of previous
destinations in the navigation system and
address book entries. Resetting is
recommended before selling or transferring
ownership of your vehicle, for example.
Data on the internal hard drive, e.g. music
files in the MUSIC REGISTER, will be deleted.
You can also delete music files from the
MUSIC REGISTER using the "Delete all music
files" function (
Y
page 209).
X
Press the W function button.
X Select Settings Settings by turning cVd the
COMAND controller and press W to
confirm.
X Select Reset Reset and press W to confirm.
A prompt appears asking whether you wish
to reset.
X Select Yes Yes or No No and press W to confirm.
If you select No No , the process will be
canceled.
42
Reset function
System
settings