Cisco 3.3 - Manual (Page 806)

Appendix F RDBMS Synchronization Import Definitions
Action Codes
F-20
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
163 ADD_RADIUS_ ATTR UN|GN,
VN, V1,
Optionally
V2, V3
Adds to the attribute named (VN) the value (V1) for
the user/group (UN|GN). For example, to set the IETF
RADIUS Reply-Message attribute (attr. 18) for a
group:
GN = "Group 1"
VN = "Reply-Message"
V1 = "Greetings"
As another example, to set the IETF RADIUS
Framed-IP-Address attribute (attr. 9) for a user:
UN = "fred"
VN = "Framed-IP-Address"
V1 = "10.1.1.1"
To add a vendor-specific attribute (VSA), set VN =
“Vendor-Specific” and use V2 and V3 as follows:
• V2 = IETF vendor ID
• V3 = VSA attribute ID
For example, to add the Cisco IOS/PIX RADIUS
cisco-av-pair attribute with a value of
“addr-pool=pool1”:
VN="Vendor-Specific"
V1 = "addr-pool=pool1"
V2 = "9"
V3 = "1"
RADIUS attribute values can be one of the following:
• INTEGER
• TIME
• IP ADDRESS
• STRING
Table F-5 Action Codes for Modifying TACACS+ and RADIUS Group and User Settings (continued)
Action
Code
Name Required Description