Cisco 3.3 User Manual

Page 203

6-13

User Guide for Cisco Secure ACS for Windows Server

78-16592-01

Chapter 6 User Group Management

Basic User Group Settings

Note

A session is any type of connection supported by RADIUS or TACACS+, such as
PPP, NAS prompt, Telnet, ARAP, IPX/SLIP.

Note

The default setting for group Max Sessions is Unlimited for both the group and
the user within the group.

To configure max sessions settings for a user group, follow these steps:

Step 1

In the navigation bar, click Group Setup.

The Group Setup Select page opens.

Step 2

From the Group list, select a group, and then click Edit Settings.

The Group Settings page displays the name of the group at its top.

Step 3

In the Max Sessions table, under Sessions available to group, select one of the
following options:

•

Unlimited—Select to allow this group an unlimited number of simultaneous
sessions. (This effectively disables Max Sessions.)

•

n—Type the maximum number of simultaneous sessions to allow this group.

Step 4

In the lower portion of the Max Sessions table, under Sessions available to users
of this group, select one of the following two options:

•

Unlimited—Select to allow each individual in this group an unlimited
number of simultaneous sessions. (This effectively disables Max Sessions.)

•

n—Type the maximum number of simultaneous sessions to allow each user
in this group.

Note

Settings made in User Setup override group settings. For more
information, see

Step 5

To save the group settings you have just made, click Submit.

For more information, see