Cisco 3.3 - Manual (Page 309)

8-3
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 8 System Configuration: Basic
Logging
Step 1 In the navigation bar, click System Configuration.
Step 2 Click Service Control.
The status of the services appears in the CiscoSecure ACS on hostname table,
where hostname is the name of the Cisco Secure ACS.
If the services are running, the Restart and Stop buttons appear at the bottom of
the page.
If the services are stopped, the Start button appears at the bottom of the page.
Step 3 Click Stop, Start, or Restart, as applicable.
The status of Cisco Secure ACS services changes to the state appropriate to the
button you clicked.
Logging
You can configure Cisco Secure ACS to generate logs for administrative and
accounting events, depending on the protocols and options you have enabled. For
more information, including configuration steps, see
Chapter 1, “Overview” .
Date Format Control
Cisco Secure ACS allows for one of two possible date formats in its logs, reports,
and administrative interface. You can choose either a month/day/year format or a
day/month/year format.
Setting the Date Format
Note If you have reports that were generated before you changed the date format, be
sure to move or rename them to avoid conflicts. For example, if you are using the
month/day/year format, Cisco Secure ACS assigns the name 2001-07-12.csv to a