Cisco 3.3 - Manual (Page 586)

Chapter 14 Network Admission Control
NAC Databases
14-14
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Configuring a NAC Database
This procedure describes how you can configure a NAC database.
Before You Begin
For descriptions of the options available on the Expected Host Configuration
page, see
NAC Database Configuration Options, page 14-12 .
For descriptions of the options available on the Select Local Policies page and
Select Local Policies page, see
Policy Selection Options, page 14-13 .
To configure a NAC database, follow these steps:
Step 1 In the navigation bar, click External User Databases.
Step 2 Click Database Configuration.
Cisco Secure ACS displays a list of all possible external user database types.
Step 3 Click Network Admission Control.
If no NAC database exists, only the Database Configuration Creation table
appears. Otherwise, in addition to the Database Configuration Creation table, the
External User Database Configuration table appears.
Step 4 If you are creating a configuration, follow these steps:
a. Click Create New Configuration.
b. Type a name for the new NAC database in the box provided.
c. Click Submit.
Cisco Secure ACS lists the new configuration in the External User Database
Configuration table.
Step 5 Under External User Database Configuration, select the name of the NAC
database that you need to configure.
Note If only one NAC database exists, the name of that database appears
instead of the list. Proceed to the next step.