Setting protocol configuration options for ietf – Cisco 3.3 User Manual
Page 114
Chapter 3 Interface Configuration
Protocol Configuration Options for RADIUS
3-16
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
appear as configurable options on the User Setup or Group Setup page. For
information about creating user-defined RADIUS VSAs, see
Setting Protocol Configuration Options for IETF RADIUS
Attributes
This procedure enables you to hide or display any of the standard IETF RADIUS
attributes for configuration from other portions of the Cisco Secure ACS HTML
interface.
Note
If the Per-user TACACS+/RADIUS Attributes check box in Interface
Configuration: Advanced Options is selected, a User check box appears alongside
the Group check box for each attribute.
Note
Each selected IETF RADIUS attribute must be supported by all your network
devices using RADIUS.
To set protocol configuration options for IETF RADIUS attributes, follow these
steps:
Step 1
Click Interface Configuration, and then click RADIUS (IETF).
The RADIUS (IETF) page appears.
Step 2
For each IETF RADIUS attribute that you want to appear as a configurable option
on the User Setup or Group Setup page, select the corresponding check box.
Note
Each attribute selected must be supported by your RADIUS network
devices.
Step 3
To specify how many values to display for tagged attributes on the User Setup and
Group Setup pages, select the Tags to Display Per Attribute option, and then
select a value from the corresponding list. Examples of tagged attributes are
[064]
Tunnel-Type
and
[069] Tunnel-Password
.