Cisco 3.3 - Manual (Page 104)

Chapter 3 Interface Configuration
Advanced Options
3-6
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
• RDBMS Synchronization—When selected, this feature enables the RDBMS
(Relational Database Management System) Synchronization option on the
System Configuration page. If RDBMS Synchronization is configured, this
option always appears.
• IP Pools—When selected, this feature enables the IP Pools Address Recovery
and IP Pools Server options on the System Configuration page.
• Network Device Groups—When selected, this option enables network
device groups (NDGs). When NDGs are enabled, the Network Configuration
section and parts of the User Setup and Group Setup pages change to enable
you to manage groups of network devices (AAA clients or AAA servers).
This feature is useful if you have many devices to administer.
• Voice-over-IP (VoIP) Group Settings—When selected, this feature enables
the VoIP option on the Group Setup page.
• Voice-over-IP (VoIP) Accounting Configuration—When selected, this
feature enables the VoIP Accounting Configuration option on the System
Configuration page. This option is used to determine the logging format of
RADIUS VoIP accounting packets.
• ODBC Logging—When selected, this feature enables the ODBC logging
sections on the Logging page of the System Configuration section.
Setting Advanced Options for the Cisco Secure ACS User
Interface
To set advanced options for the Cisco Secure ACS HTML interface, follow these
steps:
Step 1 Click Interface Configuration, and then click Advanced Options.
The Advanced Options table appears.
Step 2 Select each option that you want displayed (enabled) in the Cisco Secure ACS
HTML interface.
Caution Disabling an advanced feature in the Interface Configuration section does not
affect anything except the display of that feature in the HTML interface. Settings
made while an advanced feature was displayed remain in effect when that