Cisco 3.3 - Manual (Page 135)

4-19
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 4 Network Configuration
AAA Client Configuration
Tip If you want to save your changes and apply them later, click Submit.
When you are ready to implement the changes, click System
Configuration, click Service Control, and then click Restart.
Editing a AAA Client
You can use this procedure to edit the settings for a AAA client configuration.
Note You cannot directly edit the name of a AAA client; rather, you must delete the
AAA client entry and then re-establish the entry with the corrected name. For
steps about deleting a AAA client configuration, see
Deleting a AAA Client,
page 4-21 . For steps about creating a AAA client configuration, see Adding a
AAA Client, page 4-16 .
Before You Begin
For descriptions of the options available while editing a AAA client
configuration, see
AAA Client Configuration Options, page 4-11 .
For Cisco Secure ACS to provide AAA services to a AAA client, you must ensure
that gateway devices between AAA clients and Cisco Secure ACS permit
communication over the ports needed to support the applicable AAA protocol
(RADIUS or TACACS+). For information about ports used by AAA protocols,
see
AAA Protocols—TACACS+ and RADIUS, page 1-6 .
To edit a AAA client, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.