Cisco 3.3 User Manual
Page 370
Chapter 9 System Configuration: Advanced
RDBMS Synchronization
9-42
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Note
For more information about RDBMS setup, see
.
a.
From the Data Source list, select the system DSN you configured to
communicate with the database that contains your accountActions table.
For more information about configuring a system DSN for use with RDBMS
Synchronization, see
Configuring a System Data Source Name for RDBMS
.
b.
In the Username box, type the username for a database user account that has
read/write access to the accountActions table.
c.
In the Password box, type the password for the username specified in the
Step b.
Step 4
To have this Cisco Secure ACS perform RDBMS synchronization at regular
intervals, under Synchronization Scheduling, select the Every X minutes option
and in the X box type the length of the interval at which Cisco Secure ACS should
perform synchronization (up to 7 characters).
Step 5
To schedule times at which this Cisco Secure ACS performs RDBMS
synchronization, follow these steps:
a.
Under Synchronization Scheduling, select the At specific times option.
b.
In the day and hour graph, click the times at which you want Cisco Secure
ACS to perform replication.
Tip
Clicking times of day on the graph selects those times; clicking again
clears them. At any time you can click Clear All to clear all hours, or you
can click Set All to select all hours.
Step 6
For each Cisco Secure ACS you want to synchronize with data from the
accountActions table, follow these steps: