Cisco 3.3 - Manual (Page 196)

Chapter 6 User Group Management
Basic User Group Settings
6-6
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
To define the times during which users in a particular group are permitted or
denied access, follow these steps:
Step 1 In the navigation bar, click Group Setup.
The Group Setup Select page opens.
Step 2 From the Group list, select a group, and then click Edit Settings.
The Group Settings page displays the name of the group at its top.
Step 3 In the Default Time-of-Day Access Settings table, select the Set as default
Access Times check box.
Note You must select the Set as default Access Times check box to limit
access based on time or day.
Times at which the system permits access are highlighted in green on the day and
hour matrix.
Note The default sets accessibility during all hours.
Step 4 In the day and hour matrix, click the times at which you do not want to permit
access to members of this group.
Tip Clicking times of day on the graph deselects those times; clicking again
reselects them.
At any time, you can click Clear All to clear all hours, or you can click
Set All to select all hours.
Step 5 To save the group settings you have just made, click Submit.
For more information, see Saving Changes to User Group Settings, page 6-56 .
Step 6 To continue specifying other group settings, perform other procedures in this
chapter, as applicable.