Cisco 3.3 - Manual (Page 284)

Chapter 7 User Management
Advanced User Authentication Settings
7-38
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
This section contains the following topics:
• Setting IETF RADIUS Parameters for a User, page 7-38
• Setting Cisco IOS/PIX RADIUS Parameters for a User, page 7-39
• Setting Cisco Aironet RADIUS Parameters for a User, page 7-41
• Setting Ascend RADIUS Parameters for a User, page 7-43
• Setting Cisco VPN 3000 Concentrator RADIUS Parameters for a User,
page 7-44
• Setting Cisco VPN 5000 Concentrator RADIUS Parameters for a User,
page 7-46
• Setting Microsoft RADIUS Parameters for a User, page 7-47
• Setting Nortel RADIUS Parameters for a User, page 7-49
• Setting Juniper RADIUS Parameters for a User, page 7-51
• Setting BBSM RADIUS Parameters for a User, page 7-52
• Setting Custom RADIUS Attributes for a User, page 7-53
Setting IETF RADIUS Parameters for a User
RADIUS attributes are sent as a profile for the user from Cisco Secure ACS to the
requesting AAA client.
These parameters display only if all the following are true:
• A AAA client is configured to use one of the RADIUS protocols in Network
Configuration.
• The Per-user TACACS+/RADIUS Attributes check box is selected under
Advanced Options in the Interface Configuration section.
• User-level IETF RADIUS attributes are enabled under RADIUS (IETF) in the
Interface Configuration section.
Note To display or hide any of these attributes in the HTML interface, see Protocol
Configuration Options for RADIUS, page 3-11 .