Cisco 3.3 User Manual
Page 675
C-3
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix C RADIUS Attributes
Cisco IOS Dictionary of RADIUS AV Pairs
Note
If you specify a given AV pair on Cisco Secure ACS, the corresponding AV pair
must be implemented in the Cisco IOS software running on the network device.
Always consider which AV pairs your Cisco IOS release supports. If Cisco Secure
ACS sends an AV pair that the Cisco IOS software does not support, the attribute
is not implemented.
Note
Because IP pools and callback supersede them, the following RADIUS attributes
do not appear on the Group Setup page:
8, Framed-IP-Address
19, Callback-Number
218, Ascend-Assign-IP-Pool
None of these attributes can be set via RDBMS Synchronization.
lists the supported Cisco IOS RADIUS AV pairs.
Table C-1
Cisco IOS Software RADIUS AV Pairs
Number
Attribute
Type of Value
Inbound/Outbound
Multiple
1
User-Name
String
Inbound
No
2
User-Password
String
Outbound
No
3
CHAP-Password
String
Outbound
No
4
NAS-IP Address
Ipaddr
Inbound
No
5
NAS-Port
Integer
Inbound
No
6
Service-Type
Integer
Both
No
7
Framed-Protocol
Integer
Both
No
9
Framed-IP-Netmask
Ipaddr (maximum length
15 characters)
Outbound
No
10
Framed-Routing
Integer
Outbound
No
11
Filter-Id
String
Outbound
Yes
12
Framed-MTU
Integer (maximum length
10 characters)
Outbound
No