ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 42)

3-8 ADS FlowShark Manual
example, if the application requires a 50-foot extension cable for an
ultrasonic depth sensor, the part number would be 103228A–050.
2 Pressure depth sensors also are available in 0–15 PSI (p/n 3704–0042–
35) and 0–30 PSI (p/n 3704–0016–40).
3 The stainless steel ring includes the ring stabilizer bracket (p/n I25-0002) ,
spreader mechanism (p/n I10-0003), and sliding ultrasonic sensor bracket
(p/n I25-0001).
Gathering Tools and Equipment
Gather the following tools for the installation:
 Battery-powered hammer drill with assorted bits, including the
following at a minimum:
 ¼-inch x 6-inch masonry bit
 3/8-inch x 4-inch (minimum length) masonry bit
 5/16-inch carbide-tipped bit (include smaller bits)
 4-pound hammer
 Rubber mallet
 24-inch carpenter’s level
 7/16-inch nut driver
 Wrenches
 Screwdrivers (flathead and Phillips head of assorted sizes)
 3/8-inch x 16-inch threads tap
 Diagonal wire cutters
 Folding carpenter’s rule with a brass slide
 Rubber stretch tape