ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 160)

6-34 ADS FlowShark Manual
changes to the database before exiting each device
window.
 Select the Close button to exit the Velocity 1 device dialog
and return to the Monitor Diagnostics dialog.
5. (Diagnostics for Pressure Device only) Run diagnostics on the
pressure device as follows:
 Select the Pressure 1 device from the Diagnose Device
drop-down list, and then select the Diagnose button.
The Diagnostics dialog displays the current configuration
parameters stored in the LIF for the Pressure 1 device.
Diagnostics dialog for the Pressure 1 device
 Click on the Read button.
The Results section displays the current raw and adjusted depths
and temperature reading measured by the pressure depth sensor.
The Adjusted Depth represents a depth value established by
applying a linear offset (Press K) to a raw pressure depth reading.