ADS Environmental Services FlowShark QR 775002 A4 - Manual (Page 195)

8-8 ADS FlowShark Manual
Verifying the Analog Input Values
Verify the analog input values recorded by the FlowShark as
follows:
1. Check the readings using Diagnostics in the Profile software
(refer to Chapter 6). If possible, simulate different levels to
make sure the signal changes and compare it to a local display,
if available.
2. Check for proper operation by collecting data from the monitor
after a day of operation and comparing it to other historical
data. Use both the trend and daily total to be sure no changes to
the measurement system occurred after introducing the ADS
FlowShark into the loop.