Sindoh M403 - Manual (Page 94)

Scanner, Printer and Fax
3-
12
8
To cancel entered values, delete all characters and press the 【 】 button to go to the upper
menu.
Send the Scanned Image to the FTP Directly
If the device is connected to the network, the scanned image can be sent to the FTP server directly.
1
Place the original.
2
Press the 【SCAN】 button.
3
When [Where to scan] appears, press the 【OK】 button.
4
Select [Scan to FTP], and then press the 【OK】 button.
5
If necessary, set the document type, contrast, resolution, and scale.
6
Press the 【 】 button to start the job.
7
In [FTP enter from], enter the FTP server address.
① Search Address Book: Select the FTP address from the address book.
② Direct Input: Type in the new FTP address. When the new FTP address is entered, you are
asked if you want to save it. If you select Yes, the new FTP address is saved in the address
book and then can be selected from the address book in the future..
8
After selecting or typing in the FTP address, ID and password (if required), press the 【OK】
button to start scanning and send the scanned image to the designated FTP.
9
For more information, see 「Alphanumeric Pad」 (P. 3-11) .
Access the device web to edit or add the FTP server setting and FTP address book. For more
information, see 「Setting with the Web Image Monitor」 (P. 4-2) .