Sindoh M403 - Manual (Page 208)

Maintenance and Troubleshooting
5-
36
8. Troubleshooting
If a problem occurs, see followings.
If you can’t resolve the problem with following instructions, contact one of our dealers.
If you sense unusual sound, smell or smoke from the device, unplug the power cord immediately
and contact one of our dealers. The problem caused by unauthorized repair, remodel or
Consumables may not be covered by the warranty.
The Device Does Not Work.
Status Verification Solution Reference Page
The device does
not work. Check if the
power cord is properly
plugged. Check the power switch
and power cord. P. 1-6, 1-11
Check if the power
switch is on. Switch on the device. P. 1-6, 1-11
Nothing on the
LCD. Check if the
power cord is properly
plugged and power
switch is on. Check the power switch
and plug, and switch on
the device. P. 1-6, 1-11
Cannot dial. Check if the telephone
line is properly
connected. Connect the telephone
line properly. P. 1-6
No output paper. Check if there is
jammed paper. Check the error message
and remove the jammed
paper. P. 5-19
Frequent paper
jam and wrinkled
paper. Check if paper is
properly loaded. Load paper properly. -
Check if paper size is
correctly set. Set correct paper size. P. 2-3, 2-7
Check if proper paper
is used. Use paper described in
this manual. P. 2-3
Check if paper is wet. Use dry paper. -