Sindoh M403 - Manual (Page 211)

5-
39
Maintenance and Troubleshooting
5
Status Verification Solution Reference Page
Cannot send
the fax
manually. Did you press the
【ON-HOOK】 button to
hear a ring tone, and then
press the 【 】 button?
Press the 【ON-HOOK】
button to hear a ring tone,
and then press the 【 】
button. P. 3-42
In the memory
transmission
mode, cannot
scan the
document. Check if the document is
correctly loaded. Load the document
correctly. -
Check if the memory is
enough. Check the memory. -
Cannot Receive the Fax
Status Verification Solution Reference Page
Cannot send
the fax. Check if the automatic
transmission mode is set. Check the transmission
mode. P. 4-24
Check if the document is
correctly loaded. Load the document
correctly. -
Check if there is jammed
paper. Check the error message
and remove the jammed
paper. -
Check if the telephone line
is properly connected. Connect the telephone line
correctly. -
Check if the memory is
enough. Check the memory. -
Check if the external
telephone is connected. If you hold the
telephone and can hear a
ring tone, this means the
fax is coming in.
After listening to a beep
(two seconds later), hang
up the telephone to receive
the fax. -