Copy, Basic operation, Copy setting table – Sindoh M403 User Manual
Page 70
Copy
2-
2
1. Copy
Basic Operation
1
Place the original on the flatbed or ADF. For more information, see
2
Press the 【COPY】 button to go to the setting mode.
3
Select necessary settings.
Available settings are paper type, scale, scan quality, scan density, and sort. For more
4
To make multiple copies of the scanned original, press the 【COPY】 button. Then, press the 【◀】
or 【▶】 button until [No. of Copies] appears, and press the 【OK】 button.
5
Press the 【◀】 or 【▶】 button to decide the number of copies and then press the 【OK】 button.
You can set 1 ~ 99. If you do not set the number of copies, one copy is made.
6
Press 【 】 the button to start copying.
Note
- Press the 【 】 button to cancel copying.
- Reset settings, to press the 【 】 button more than two seconds.
Copy Setting Table
Copy
No. of Copies
Original Size
Paper Size
Paper Source
Original Type
Darkness
Brightness
Contrast
Background Remove
Scale
Copy Type