Sindoh M403 - Manual (Page 193)

5-
21
Maintenance and Troubleshooting
5
Message Description Response
Insufficient Memory Not enough memory to continue
the fax, scan or copy job.
If a scan job is initiated from the
PC, close all applications on your
PC and retry.
If a fax/copy job is being
executed, decrease the amount
of the document from the ADF.
USB Cable
Disconnected The USB cable is disconnected
during scanning to the PC. Check the USB cable is
connected. If the cable is
connected, disconnect and
connect it at both the PC and the
MFP again.
USB Not Ready When USB Memory is used,
access to the USB Drive is not
available. Check if the USB Drive is
properly connected. It takes 5
seconds to recognize the USB
Drive. So, wait for five seconds
after installing the USB Drive.
Some USB Drives may not be
recognized. Try with a different
type of USB memory.
File Write Error Fail to write or send scanned
files if scanning files to USB
Memory, scanning emails, or
FTP scanning.
Scan with the USB memory:
Connect the USB memory again.
The USB drive may not have
enough space.
E-mail scan:
Check if the network is correctly
connected or e-mail server
settings are correct..
FTP Scan:
Check if the network is correctly
connected or ID and password to
the FTP server are correct.
Unknown File
Format
The file on the USB memory is
not supported for printing when
using the Print from USB Drive
function.
Check if the file is corrupted at
the PC.
Some image file compression
methods are not supported. To
print a non-supported file, print
it at your PC.
Err: Enter No. No fax number is entered. Enter the number and retry.