Sindoh M403 - Manual (Page 54)

Preparation for Using the Device
1-
26
Placing the Document on the Exposure Glass
1
Lift the ADF.
Lift the ADF more than 20 .
If the lifting angle is less than 20 , the original may not be detected.
2
Place the original face-down on the exposure glass with the upper-left corner of the original at
the corner indicated by the icon on the scanner.
3
Lower the ADF.
Note
- If the original is loaded to the ADF, the original on the flatbed is not scanned.
- Do not press the book on the flatbed too hard.
- A sharp part may leave a dent on the exposure glass.
ADF