Sindoh M403 - Manual (Page 141)

4-
13
Settings of Each Function
4
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Reports] appears, and then press the 【OK】 button
3
Press the ◀ or ▶ button until [Print Error Log] or [Sample Page] appears, and then press
the 【OK】 button.
- “Printing” appears while the report is being printed.
When the report is printed, the device is switched to the [Ready] mode.
Fax TCR Report Printing
The [Memory File List] shows documents standing by on the memory.
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Reports] appears, and then press the 【OK】 button.
3
Press the ◀ or ▶ button until [Fax TCR Report] appears, and then press the 【OK】 button.
- “Printing” appears while the report is being printed.
When the report is printed, the device is switched to the [Ready] mode.
Fax Tx/Rx Report Printing
The [Memory File List] shows documents standing by on the memory.
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Reports] appears, and then press the 【OK】 button.
3
Press the ◀ or ▶ button until [Fax Tx/Rx Report] appears, and then press the 【OK】 button.
- “Printing” appears while the report is being printed.
When the report is printed, the device is switched to the [Ready] mode.
Memory File List Printing
The [Memory File List] shows documents standing by on the memory.
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Reports] appears, and then press the 【OK】 button.