Sindoh M403 - Manual (Page 192)

Maintenance and Troubleshooting
5-
20
Message Description Response
Paper Empty:MPT There is no paper in the MPT. Load paper to the MPT.
101 Paper Jam No paper supplied from the tray
1. Check if paper is properly loaded in
the tray 1.
102 Paper Jam No paper supplied from the tray
2. Check if paper is properly loaded in
the tray 2.
103 Paper Jam No paper supplied from the MPT Check if paper is properly loaded in
the MPT.
104 Paper Jam Paper jam inside of the device. Open the front cover and pull out
the cartridge to remove the jammed
paper.
105 Paper Jam Paper jam inside of the device. Open the front cover and pull out
the cartridge to remove the jammed
paper.
106 Paper Jam Paper jam in the feeder. Open the back over to remove the
jammed paper from the feeder
path.
107 Paper Jam Paper jam in the duplex unit. Open the duplex unit cover to
remove paper from the paper path.
Check Paper Size The message tells that the paper
does not match the printer
settings. To fix the problem, load
appropriate paper to the tray, and
then press the 【 】 button. See
「Paper Setting」(P. 4-3) to change
printer settings.
Drum cartridge
change It is time to replace the drum
cartridge. Replace the cartridge with a new
one, and then reset the drum
cartridge counter to have the
message disappear.
Reference
- If you don’t replace the
cartridge, quality problems may
occur.
Insufficient Memory The original exceeds print
capacity.
Separate the original for printing.
201 Scanner Jam No paper from the ADF. Adjust the document and then
retry.
202 Scanner Jam Paper jam in the ADF. Remove a jam and retry.