Sindoh M403 - Manual (Page 140)

Settings of Each Function
4-
12
4
Press the ◀ or ▶ button until [Factory Defaults] appears, and then press the 【OK】 button.
5
[Are you sure? Yes/No?] is displayed on the LCD.
6 Press the 【OK】 button to reset all settings.
- [Reinitialize… Do not touch] appears. Then the device restarts.
Be aware that all settings are restored to factory settings.
7
To cancel, press the 【 】 button.
System Report Printing
The [System Reports] shows menus, current options, cartridges and current device settings (custom
settings). With this report, the user can see device settings.
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Reports] appears, and then press the 【OK】 button.
3
Press the ◀ or ▶ button until [System Reports] appears, and then press the 【OK】 button.
- “Printing” appears while the report is being printed.
When the report is printed, the device is switched to the [Ready] mode.
Network Report Printing
The [Network Report] shows network settings and relevant information.
With this report, the user can see network settings.
1
Press the 【MENU】 button.
2
Press the ◀ or ▶ button until [Reports] appears, and then press the 【OK】 button.
3
Press the ◀ or ▶ button until [Network Report] appears, and then press the 【OK】 button.
- “Printing” appears while the report is being printed.
When the report is printed, the device is switched to the [Ready] mode.
Error Log and Sample Page Printing
The [Print Error Log] shows the history of errors. Up to most recent 20 errors are displayed.
You can print the [Sample Page] to test printer performance.