Sindoh M403 - Manual (Page 80)

Copy
2-
12
OHP Copy
To prevent the roller mark or shade images, place a book and white LETTER paper over the OHP to
make a copy.
Book
A4 Paper
Duplex
Two pages of the original document can be printed into both sides of paper.
How to make 2-sided copies
1
Press the 【COPY】 button to enter the copy setting mode.
2
Press the 【◀】 or 【▶】 button until [Duplex] appears, and the press the 【OK】 button.
3
Press the 【◀】 or 【▶】 button to select [Long Edge Feed] or [Short Edge Feed], and the press
the 【OK】 button.
4
When the flatbed is used, after the document is scanned, “Scan Next Page” appears.
Then, place the other side on the flatbed and press the 【 】 button. Two pages of the document
are copied into both sides of paper.
The first scanned page is copied into the front side of paper.
5
If the ADF is used, the even numbered page is copied into the front side, and odd numbered
page is copied into the back side.