Sindoh M403 - Manual (Page 174)

Maintenance and Troubleshooting
5-
2
1. Maintenance of Consumables
Status of Consumables
The LCD shows when consumables need to be replaced.
In [Reports], print the [System Report] to check the status of consumables. Press the 【MENU】
button. Press the 【◀】 or 【▶】 button until [Reports] appears, and then press the 【OK】 button.
Press the 【◀】 or 【▶】 button until [System Report] appears, and then press the 【OK】 button to print
the system report. Check out [Toner remain life in percent].
However, as the remaining life is decided assuming consumables are applied to 5% of whole page,
if the device is used in abnormal conditions or inappropriate density is used, the remaining life may
not be correct.