Sindoh M403 - Manual (Page 125)

3-
43
Scanner, Printer and Fax
3
On-Hook Dial
If you call your receiver and then fax the document, use this function.
1
Place the original on the flatbed or ADF.
2
Press the 【ON-HOOK】 button to switch to [Off-Hook].
- A beep sounds from the speaker.
3
Enter the receiver’s number.
- Use the number pad to enter the number directly in case of on -hook dial. Speed dial and
address book are not supported.
4
Check the call sound from the receiver.
If you dialed a wrong number of there is no response, press the 【ON-HOOK】, 【 】, and 【 】
buttons to return to [On-Hook].
5 When the call sound is heard, press the 【 】 button to fax the document.
6 When the document is faxed, the device automatically switches to the [On-Hook] mode.
- When this function is used, Broadcast Tx is not available.