Sindoh M403 - Manual (Page 93)

3-
11
Scanner, Printer and Fax
3
4
Press the【◀】or 【▶】 button until [Setup MailServer] appears, and then press the 【OK】
button.
5
Follow below steps.
① Enter the e -mail server address to [Server Address]. For example, if you want use Google
gmail, enter “smtp.gmail.com”.
② Select [Authentication]. Decide whether or not to use password.
③ Enter [Email ID]. Enter your e -mail address registered to the e-mail server.
④ Enter [Password]. Enter the password to your account.
⑤ Select [Secure Connect.] and [Server Port].
Contact your e -mail server administrator or service provider for [Secure Connect.] and
[Server Port].
Alphanumeric Pad
Use the key pad, or 【◀】 or 【▶】 button to enter the address or password.
1
Press the number key, then character in the key appears one by one.
The character appears in order of lower case, number and upper case.
2
In the character mode, press the 【 】 button to change the available character group.
There are four character groups for your convenience: number (0 ~ 9), lower case (a~z), upper
case (A ~ Z), and symbol (@, #, %).
3
Press the 【 】 button to switch to the character group.
The character group appears in order of lower case > special character > (Enter) >
number > upper case.
Press the 【 】 button to switch to the character group, and then press the number key to enter
the character.
4
Press the 【◀】 or 【▶】 button to show all character groups..
5
Enter one character, and then press the 【OK】 button. The cursor goes to the next space.
Or press another number key to go to the next space.
6
When entering is complete, press the 【 】 button to switch the character group to, and then
press the 【OK】 or 【 】 button. The entered value is saved, and you go to the next field.
7
Press the 【 】 button to delete the character.